The IMAX B6 80W 6A Charger/Discharger 1-6 Cells is a very advanced charger, able to charge, balance and discharges Li-Ion, Li-Poly, Li-Fe (A123), Ni-Cd and NiMH batteries.
It's microprocessor controlled just like all the best chargers and will balance the individual cells in your Li-XX batteries.
It will charge from 0.1 to 6.0A and is capable of charging packs up to 6S packs.
It’s feature input voltage protection so as not to flatten your car battery at the field and will also storage charge you pack for when you are not using them.
You can power it with any power supply delivering from 11~18V so it is very flexible.
This charger has a JST-XH charge plug, which makes it compatible with Zippy, HXT, Long Max and any pack with a JST adapter.
Features:
Microprocessor controlled
Delta-peak sensitivity
Individual cell balancing
Li-Ion, Li-Poly, and Li-Fe capable
Ni-Cd and NiMH capable
Large range of charge currents
Storage charge function
Time limit function
Input voltage monitoring
Data storage (Store up to 5 packs in its memory)
Battery break in and cycling.
Support new generation A123 system (Li-Fe) battery
Specification:
Operating voltage range: AC to DC adaptor(DC10.0-20.0V/6A)
Circuit power: Max charge power 80W / Max discharge power 10W
Charge Current Range: 0.1~6.0A
Discharge current range: 0.1-2.0A
Current drain for balancing Li-Po: 300mAH/cell
Li-Ion/Li-Po/Li-Fe cells : 1-6 series
Ni-Cd/NiMH cells : 1-15cell
PB battery voltage: 2~20v
Net Weight: 277g
Dimensions: 133x87x33mm
Package Includes :
IMAX B6 80W 6A Charger.
T plug with banana connector charging cable.
DC cable with Alligator Clip charging connector.
T plug with Alligator Clip connector charging cable.
T plug with Futaba connector charging cable.
T plug with JST connector charging cable.
T plug with XT60 connector charging cable.
English manual.
No reviews found