5 Inch Camera HD CCTV Tester for IP, AHD, TVI, CVI, HD Cameras
Introduction: The HD coaxial tester is developed for the on-site installation and maintenance of HD coaxial camera.
Support TVI/AHD/CVI cameras. (DOES NOT Support IP Camera).
Product Functions: Video signal testing/PTZ controller/Image generator/DC 12V 1A output power/Audio testing/Enhanced network cable testing/TVI camera test/AHD camera test/CVI camera test/LED lamp/The battery graphic display.
High-resolution: 5.0 inches 800(RGB) x480 resolution, wide viewing angle display, viewing angle larger, more intuitive and easy to display the camera image quality.
Support NTSC/PAL(auto adapt) standard video signal.
PTZ control: Support RS485, compatible with Pelco-D/P PTZ control protocol.
Baud and address can be set.
Through its own RS485 interface, the user can control the PTZ up, down, left, right rotation, and adjust the machine zoom, focus, aperture size.
Support both PAL/NTSC format standard color bar output(Red, Green, Blue, White, Black, Grey) and testing image output.
Rechargeable: Power the camera with DC 12V (1A) power output from the tester.
It is helpful for demo and testing when the power supply is not available.
Built-in 18650 2600mA (3.7V) battery, after charging 3-4 hour, working time lasts 11 hours.
Main Features
Video signal testing video monitor tester, High-resolution 5.0 inches 800(RGB)x480 wide viewing angle display, Viewing angle larger, more intuitive and easy to display the camera image quality.
Support PAL/NTSC standard video signal.
Color bar generator Support both PAL / NTSC format’s standard color bar output (Red, Green, Blue, White, Black, Grey) and testing image output
Video IN/OUT 1 channel BNC Input & 1 channel BNC Output.
Product Advantages
Audio testing Test the audio input from pickup devices.
Connect the tester and pickup device with the audio cable.
UTP cable test Display UTP cable connection status, cable type and the sequence of wires as well as read the number of the test box.
CVI camera test HD video surveillance testing, support 1MP, 2MP, 3MP, 4MP. When CVI signal input, the tester will display the CVI camera image.
TVI camera test HD TVI video surveillance testing, support 1MP, 2MP, 3MP, 4MP, 5MP. When TVI signal input, the tester will display HD TVI camera image.
AHD camera test HD video surveillance testing, support 1MP, 2MP, 3MP, 4MP, 5MP. When AHD signal input, the tester will display the AHD camera image.
The tester cannot automatically choose TVI, CVI, AHD, you need to choose Manually.
PTZ controller Support RS485, Compatible with protocols PELCO-D/P, Baud Rate: 600,1200, 2400, 4800, 9600, 14400bps.
LED lamp It is useful for the engineer to install and maintain security system at night. LED On/Off pressing button, easy to operate.
The battery graphic display The tester has advanced power control and protection circuit, low-power energy-saving, 3 to 4 hours on a single charge, can be used normally for 11 hours.
No reviews found