Handheld CCTV AHD Tester Mointor,Portable CCTV HD Tester video security equipment,with 4.3 inch LCD
Supports CVBS analog camera test
Wrist wear portable design, Foldable design, easy to load and unload
Supports UTP Cable test
Supports 12v power output for camera test
Supports color bar generation out for monitor test
16:9 & 4:3 display ratio switch to get correct image display way on LCD monitor
Application:
Monitor: Camera quality inspecting; image of installation correcting; inspect and repair of monitor system circuit…… etc.
Function:
Portable product: Portable product is able to use in any place and any time. It is easy to hold and do not need complicated equipment that hinders the inspecting and repairing
monitor: 4.3 ″high image resolution monitor enable to show clear image that fits any place to use.
Long work time: Equips with Lithium battery of high capability. Each 6hours recharge durables 5 ～8 working hours
Humanized design of appearance: Hand-hold design for professionals. Easy operation without taking off gloves speeds your works. Clasp ring at bottom fits to all chains and use in all environments
Support DC power for camera: It's convenient for user to check camera condition and correct direction of camera, so to make installation and repairing easier
The net line test function: Can carry out can see to turn to show that the net line conjunction circumstance and the net lines link the sequence
all Input function:
1.4.3 "TFT LCD
2. When the load insertion of the transformer, the indicator (red) is bright, sufficient power extended instructions
3. The (green) indicator is bright after the switch output, indicator will turn off when the switch is close.
4. Press the menu button to open or close the LCD Function Setup menu.
5-6: Function menu open, press this button to adjust the brightness, contrast in the color saturation. Increased volume. Language Selection
7. select the 16: 9 or 4: 3 screen format
8. Lighting switch.
9. 5 V AC / DC input power adapter, DC5V 1.0A.
switch 10. Power.
11 Camera 12 V output power, video, input audio signals through the interface, output, screen on the host screen
12: Reset switch
13. High brightness LED work light illumination
14. detection portable
15 folding wrenches 15.le
Specification:
Display: 4.3-inch LCD 480 * RGB * 272 (QVGA) resolution, 64K color
Screen Adjustment: Video Display brightness, contrast, color saturation adjustable
Pixel number: 480RGB (H) X272 (V)
Resolution: D1,720P,960p,1080P
Video: Video In * 1 (BNC connector)
export: 7 kinds of color bar signal output
HD video signal: HD AHD / CVBS
DC power output * 1
Power output: Temporary power output 12V 1A DC
(CCD Camera Power Supply Stand / Max 500mA Coin Power)
Video System: NTSC/PAL Automatically recognize
Cable test: With A RJ45 Adapter
language: English / Chinese Support
Battery Specification: Built-in Rechargeable Lithium Battery: 3.7V 2600mA / h
external power supply: DC 5 V 1.0A Adapter
Working Environment: -20---+70 /30%-90%Rh
Dimensions / Weight: 178mm (L) x110mm (W) x 40mm (H)
Weight: 350g
Question :
Question: Why can't turn on the device:
1.Check battery power capability.
2.Check if correctly using the original manufactured re-charger.
3.Check if the re-charger is normal function.
Question: Why can't the image function normally?
1.Check if the camera connects correctly with the terminal of the mainframe.
2.Check if the power is on or off.
3.Check power volume. Please recharge if the power is run out.
Packing List:
1*camera tester
1*charger
No reviews found