.

C27-WW Wireless Digital Door Chime and Smart Doorbell

Write a review
430,000 تومان
34586
In stock
+
ArazLine or Zogin C27-WW Wireless Doorbell
A wireless doorbell eliminates the need for internal wiring, can be installed with minimal tools, and the chime box receiver can be placed anywhere within the range of the doorbell transmitter.
A wireless doorbell system generally consists of two components: a doorbell transmitter and a chime box receiver.
When a visitor presses the wireless doorbell button at the front door, the battery-powered transmitter sends out a signal over a designated radio frequency.
The receiver inside the chime box detects this signal and emits a loud electronic tone of the owner's choosing.
If there are several receivers within range of the transmitter, all of them should chime simultaneously.

Futures:
150 meters open distance, The actual use distance is suitable for most families

60 pieces of melody: rich melodies, giving the family a more beautiful environment

5 levels of volume: You can choose the appropriate volume according to your family needs.
High decibel volume can not miss visitors, low decibel volume will not disturb family rest

Free Pairing
The button supports up to 8, and the receiver has no limit.

IP44 Waterproof
IP44 supports life splashing water.

Notice:
1. The distance is an open distance. In actual use, the distance will be shortened due to the increase of obstacles
2. Although the frequency is 433MHZ, due to the incompatibility of the self-generating program, it cannot be used with other doorbells or other products.

Specification
Model Number: C27-WW
Power Source: Plug
Product Name: Wireless Door Bell
Material: ABS Plastic
Work Frequency: 315MHZ / 433MHZ
Power supply(Chime): AC 80V-260V
Power supply(Push button): 1x12V 23A
Operating range(Open area): 150M
Sound options: 32 Melody Options
Color: White
Volume: 3 volume
Certificate: CE RoHS

Q: How to install a wireless doorbell?
A:Please test the operation range between the receiver and transmitter first.
1.Receiver: Plug the receiver into a standard outlet.
2.ransmitter: After making sure the right mounting position, clean the flat area where you want to install the transmitter. Remove one side of the double-sided adhesive tape and stick it to the back side of the transmitter, remove the other side of the tape and stick it to wall, the press it for 10 seconds.
 
Q: How do I change the sounds on my wireless doorbell?
A: It is very easy to change the sounds of your wireless doorbell. It can be done in seconds with very little effort.
1.Set Ringtone: 55ringtones for you to choose. Press button Forward/Backward on the receiver to choose your favorite ringtone.
2.Enter Pairing Mode: Press the Volume button and Forward button on the receiver at the same time until it makes a ‘Ding-Dong; sound and the indicator flashes. It will exit the pairing mode after 5 seconds automatically.
If not completed, try this operation again.
3.Press the button on the transmitter, when the receiver plays the selected ringtone automatically, the pairing is completed.
 
How do I change the volume on my wireless doorbell?
A: For every press the Volume button, volume cycle plus one, 5 levels total. The first level is silent mode, only indicator flash.

Can I install my doorbell push button outside where it could get wet?
A: Yes, the doorbell push is waterproof (IP44 rating) and is protected from rain showers.

No reviews found