* T1, T2, T1-T2, Type K/J.
* ℃/℉, 0.1 degree/1 degree.
* Type K : -100 to 1300 ℃.
* Type J : -100 to 1200 ℃.
* Data hold, Record ( max., min. ).
* RS-232 interface, data logger.
* DC 9V battery ( 006P ) or
DC 9V adapter in.
T1, T2, T1-T2, two display
FEATURES
* Two channels thermometer, T1, T2, T1-T2, T1 only. Over Indication Show " ".
* Both type K/J temp. measurement, wide range. Data Hold Freeze the display reading.
* ℃/℉, 0.1 degree. Memory Recall Maximum & Minimum value.
* Microcomputer circuit provides intelligent function Sampling Time Approx. 1 second.
and high accuracy. of display
* LCD with two display, easy readout. Power off Auto shut off saves battery life or
* Manual and auto data logger, with flexible sampling manual off by push button.
time selection, can save max. 1,600 reading data. Data Output RS 232 PC serial interface.
* Records Maximum and Minimum readings with recall. Operating 0 to 50 ℃.
* Data hold function for freezing the desired value. Temperature
* It can default to accept type K or type J Temp. probe. Operating Less than 80% R.H.
* It can default auto power off or manual power off. Humidity
* It can default the measuring unit to ℃ or ℉. Power Supply 006P DC 9V battery
* Build in the input socket for DC 9V power adapter. ( Alkaline or Heavy duty type ).
* RS232 PC serial interface. DC 9V adapter input.
* Few panel buttons, easy operation. * AC/DC power adapter is optional.
* Built-in low battery indicator. Power Current Approx. DC 5.5 mA
* Heavy duty & compact housing case. Weight 196 g/0.43 LB.
Dimension 135x60x33 mm, ( 5.3x2.4x1.3 inch ).
GENERAL SPECIFICATIONS Accessories Instruction manual....................1 PC
Circuit Custom one-chip of microprocessor LSI Included
circuit. Optional * Type K thermocouple probe.
Display LCD size : 44 mm x 29 mm Accessories TP-01, TP-02A. TP-03, TP-04
dual function LCD display. * AC to DC 9V adapter.
Display Unit ℃, ℉. * RS232 cable, UPCB-02.
Resolution 0.1 ℃, 0.1 ℉. * USB cable, USB-01
Channels T1, T2, T1-T2, T1 only. * Data Acquisition software,
Thermocouple Type K or Type J. SW-U801-WIN.
type * Data Logger software, SW-DL2005.
Sampling Time Manual Push the data logger button * Carrying case, CA-52A.
of Data Logger once will save data one time.
* Set the sampling to 0 second. ELECTRICAL SPECIFICATIONS (23±5 ℃)
Auto 1, 2, 5, 10, 30, 60, 600, 1800, Sensor Reso- Range Accuracy
3600 seconds. Type lution
Data Logger Max. 1,600-point Data logger Type K 0.1 ℃ -50.0 to 1300.0 ℃ ± ( 0.4 % + 0.8 ℃ )
number -50.1 to -199.9 ℃ ± ( 0.4 % + 1 ℃ )
Temperature Automatic temp. compensation for the 0.1 ℉ -58.0 to 2372.0 ℉ ± ( 0.4 % + 1.5 ℉ )
Compensation cold junction both type K/J thermometer -58.1 to -327.8 ℉ ± ( 0.4 % + 1.8 ℉ )
Type J 0.1 ℃ -50.0 to 1100.0 ℃ ± ( 0.4 % + 0.8 ℃ )
Linear Linear Compensation for the full range. -50.1 to -199.9 ℃ ± ( 0.4 % + 1 ℃ )
Compensation 0.1 ℉ -58.0 to 2012.0 ℉ ± ( 0.4 % + 1.5 ℉ )
Offset, Span Available for advanced calibration -58.1 to -327.8 ℉ ± ( 0.4 % + 1.8 ℉ )
Adjustment procedure. * Accuracy value is specified for the meter only.
Probe Input Standard 2 pin thermocouple socket. * Type K probe TP-01 TP-02A, TP-03. TP-04 is the
Socket optional type K Temp. probe.
No reviews found