Description
Product Name: Single wireless digital smart home appliance light remote control switch
Item Code: 103960030
Short Description: Single remote control switch for household lighting
Quantity: 1 lot (10 Piece / lot)
Package Size: 10.0 * 10.0 * 10.0 ( cm )
Gross Weight/Package: 4.0 ( kg )
1. Product Name: Single remote control switch for household lighting
2. Product Accessories: Receiver 1, remote 1, remote control, a remote control holder, accessory bag 1, battery 1,Manual 1.
(1) Receiver Dimensions: 90 * 40 * 22mm, the receiver has screw holes at both ends can be fixed on the wall or ceiling.
(2) remote control Dimensions: 95 * 38 * 11mm, remote control for the silver face, black bottom, that is elegant and noble.
(3) Remote Control Battery: 12V A23 batteries. If you press the remote control 20 times a day, life expectancy up to 365 days.
3. Product Specifications:
(1) Working voltage :180-250VAC ,50-60Hz
(2) Maximum current: 10A 250VAC
(3) Receive frequency: 315MHz
4. Remote control signal: Radio transmitter and receiver.
5. Remote control distance: 50 meters (open), every other wall remote control more than 25 meters (in the living room can be remote control of lamps).
6. Each output power:
(1). Incandescent maximum power of 1000W
(2). 350W maximum power saving lamps
7. Applications: home, hotel, hotels, warehouses, office buildings and other places
8. Remote control switch for small household appliances (power 350W or less)
For lighting (ceiling, spotlights, lamp, background lamp, crystal lamp, incandescent lamp, bracket lamp)
9. Mounting Position: lighting, the appliances, the walls inside, and the receivers fixed when you think the appropriate location.
10. Functions and features
(1), A button B button can be on and off, power failure, then call, remote lock themselves (not their own bright light)
(2), in the remote state of the receiver is off (light in the off hours) using the wall switch can turn on the lights, turn off the lights when using the wall switch, please turn off the lights for 3 seconds and then open the wall switch to keep the receiver power (At this point does not light), so that normal use of the remote control.
(3), convenient installation, the battery life of more than one year, when the remote control from the recent changes, please replace the battery, model (12V A23).
11. Wiring instructions and precautions:
(1), a total of five line receivers, the red line is the line of fire (power supply positive) input, the white line is the line of fire (power supply positive) output, the two black lines are the zero line (power supply negative). Arbitrary a black line and red line connected power supply negative and positive power supply: I have one black wire and white wire to the lamp input line or other load input line, that is, the receiver connected to the light and the necessary power center, the other end of the receiver slender white line is the signal line (antenna), can not access (if received power on the remote control receiver causes damage).
(2), installation must first cut off power supply, installed, be sure to check the output line is not short-circuit (white line and black line can not short circuit will damage the receiver).
No reviews found