It adopts imported CPU chip and digital RF technology , coding with large-scale code chip Remote control and manual control are has double security control function.
Features:
1. Open the power, then the light turn on
2. Both wall-switch and remote control emitter can control the light.
3. It has the function of the theft-proof, timing and opening the light.
4. Also delay to close the light
5. It can load 3 roads, its rated load 1500w, energy-saving lamp loads 500w.
6. The distance of remoting is over 30 meters.
7. The hand phone-shaped emitter and Receiver `s outer shell are made from PC material which can bears the heat fire prevention.
Product Technology
Working voltage:180-240V50HZ
Remote distance:s≥30M
Max load power :pt4500W;each pt1500W.(inductive 500W)
Working voltage:12v(A23 battery)
Product Function
Use Remote control
Push 1 button and 1 group loads on ,push 1 button again and 1 group loads off.
Push 2 button and 2 group loads on ,push 2 button again and 2 group loads off.
Push 3 button and 3 group loads on ,push 3 button again and 3 group loads off.
Push PS button after delay 70s The light off. Each 75 Minutes the light power on ,after 3 Minutes the light automatic power off.
Push any button for cancel the command.
Push ON/OFF button all group loads on or off.
No reviews found