The MASTECH MS6818 Underground Wire Cable Metal Pipe Locator Detector Tester consists of a signal transmitter and a receiver, widely used in the construction and maintenance of communication cables, power cables, metal pipes, and much more. Current and voltage conducting cables, electrical circuits, conduits, water and heating pipelines, fuses, switches can all be located.
Short circuits and interruptions of assorted lines and cables can be detected.
Even better, the detection is possible not only underground but also in walls and concrete.
Feature :
Find the Beaks or Shorts in Cable in the wall or Earth
Track Cables in the wall or Earth
Find the Fuse and Safeguard
Find the Beaks or Shorts in Conduit under the Floor
Track a Metal Conduit in the Project of ware or hot
Sensitivity of Receiver can be selected
Auto Ranging,
Auto Power Off
Backlight and Work light
Specifications:
Technical Parameters of Transmitter
Output Signal: 125kHz
External Voltage: DC12~400V AC12~400V(50~60Hz) ±2.5%
Fuse: F0.5A 1000V
MIN Current: about 31mA
MAX Current: about 115mA
In Work: 0~40℃, with MAX relative humidity of 80%
In Storage: -20~60℃, with MAX relative humidity of 80%
Altitude: <2000m
Size : 190mm x 89mm x 42.5mm / 7.48" x 3.5" x 1.67"
Weight : 420g / 0.92lb
Supply : 1x9V 6F22 Battery
Technical Parameters of Receiver
Depth of Tracking: The Depth of Tracking Depends on the Material and Specific Applications
Cable: Single pole application: about 0~2m
Locating: Dual pole application: about 0~0.5m
Mode: Single loop line: Up to 2.5m
MIN Current: about 32mA
MAX Current: about 89mA
In Work: 0~40℃, with MAX relative humidity of 80%
In Storage: -20~60℃, with MAX relative humidity of 80%
Altitude: <2000m
Size : 241.5mm x 78mm x 38.5mm / 9.5" x 3" x 1.5"
Weight : 350g / 0.77lb
Supply : 6x1.5V AAA Battery
Certificate : CE / ETL / RoHS
Safety Rating : CAT III 300V
No reviews found