SHALUO CH2810A New 12V 24V Lead Acid Battery Charger 10A Switch Power Float Chargers Pcb Circuit Adapter Module for Diesel Generator Set
CH2800 series intelligent charger is specially designed for charging 12v / 24v battery, which is the most advanced in the industry to realize intelligent charging. There are three models: CH2810A ( 10A ), CH2806A ( 6A ) and CH2804A (4A ).
Intelligent Charger is specially designed for starting or working of storage battery (especially suited for full-sealed solid wide-temperature storage battery) in diesel engine. It is a intelligent mode of switch structure.
It features in constant pressure, constant current, tricking current, resistance of short circuit, and fully automated function.
This Battery Charger CH2810 is specially designed for Lead-acid battery, it is the replacement and upgrade of the traditional charger.
It can save the energy more than 30% and lasten the life of Lead-acid battery over 50%.
It can work between AC160~280V,AC80~280V and many other voltage ranges. Working frequency is 20~100Hz, temperature range is -20°C~+65°.
Intelligent Charger for Storage Battery
working of storage battery Intelligent Charger is specially designed for starting(especially suited for full-sealed solid wide-temperature storage battery) in diesel engine. It is intelligent mode of switch structure. It is the only one charger in market which can automatic identify charging voltage, current and can automatic switch over corresponding output voltage. It features in constant pressure, constant current, tricking current, resistance of short circuit, and fully automated function.
1. Features of the product
1.1 Wide working voltage of AC 160-277V, and working frequency of 20-100Hz, the engine still be charged at the low speed of rotation (users can directly replace the charger).
1.2 It can work in a wide temperature between -40 C and +50 C, and can be used in a98%RH wet condition without congealing
1.3 Constant current and fast charging. When the pressure of charge battery lower than the set value (12V battery group<12V, 24V battery group<24V), charge engine will work at the highest speed with a constant current. If electrical machine works at the same time, starting current is a large flow' (charge engine is close to short circuit), but its constant current feature makes the equipment undestroyed. (See the section of constant current in graph 1)
1.4 Limited current. When the voltage of storage battery is full, (12V battery group > 12V.24V battery group >24V) charge current will be automatically limited. (See the section of constant voltage in graph 1)
1.5 Tricking current and float charging. It will turn to float charging within about 0.1-0.2A(Relevant to the amount of electricity the objective equipment consumed) when the voltage reaches the set value. (13.8 V in the state of 12V, and 27.6 in 24V),
1.6 Stop charging. When the voltage of battery reaches the full value, (14 V in the state of12V, and 28V in 24V) charging will be shut completely.
1.7 Over current and protection against for short circuit. Charging engine functions in overcurrent and protection against for short circuit. When the capacity of battery is big, (inner resistance is small) bearing short circuit or charge engine is close to normal electricity and the storage battery starts diesel engine at the same time, the output current will still be constant and not be destroyed. Thus, when the storage battery used as the starting battery, charging engine cannot be shut.
1.8 Soft start. Because the system adopts the soft start function, it will not produce spark for electrical impulse. Besides, when the engine is connected online, it will not interrupt the electricity system.
2. Instruction for Usage
2.1 Battery charge is specially designed for storage battery. Its output contains the element of positive impulse as for the charge, but not suitable for electricity supplier for electrical equipment's, or it will interrupt the electrical equipment's.
But it will be different when charging in storage battery.
2.2 Connecting lines. L is the fire line of 220V. N is the zero line of 220V. L is the ground line. + is the positive pole, and- is the negative pole. Ground end should be connected well!
2.3 If user have no precautions against earthquakes, do not directly install on diesel group.2.4 Although the charge is dealt with damp-proofing, it should be cautious that water or other liquid should not be adhered to it. Besides, ventilation and keeping far away from thermal radiation should be kept alarm in installation in order to prevent the damage for high temperature There is a light emitting diode (LED) on the face board. When it appears different colors, it shows the different working conditions. Red - constant and fast charging. It means the charging current is the maximum value of current. (The output LED is red also). Orange (red and green) is the phase of current charging. Charging current is less. If it is redder, current is larger; if it is greener, the situation will be the reverse. Green shows the storage battery is almost full. (Output LED is green also)
Certified Quality: This product meets CE certification standards, ensuring compliance with European safety and performance requirements.
Reliable Power Supply: The 10A switch power float charger provides a consistent power supply for your generator set, ensuring reliable operation and minimizing downtime.
Wide Voltage Compatibility: Designed for both 12V and 24V lead acid batteries, this charger module offers flexibility for various applications.
Long-Lasting Performance: With a 1-year warranty, you can trust this product to deliver reliable performance for an extended period.
Cost-Effective Solution: As a cost-effective alternative, this charger module is an excellent choice for users looking to upgrade their generator set's charging system.
NOT GOOD ITEMS, GREAT ITEMS:
12V 24V lead acid battery charger module 5A switch power generator float chargers pcb circuit adapter module.
PRODUCT PROPERTY: Choose from the brand of baochai for our product.
Product original from cn(origin).
REASONS TO BUY:
24v 10A generator battery charger:
The pcb module charger is designed to provide maximum power output and protection for your electronic devices.
GENERATOR TO CHARGE 12V and 24V BATTERY:
The battery is powered by a usb cable, which can be charged directly on the power source.
it also has a built-in rechargeable battery to charge multiple devices.
PCB CIRCUIT ADAPTER MODULE:
Pcb circuit adapter module is used to connect the power source, which is very convenient for you to charge.
BUYER SAYS:
Very good product already installed several works very well recommend.
RELATED INFO:
Get 12v & 24v acid lead battery charger circuit, generator battery charger 12V 24V at a bigger saving.
Product Introduction:
SHALUO series chargers with European EMC and LVD standards, are used to charge a variety of wet batteries or jelly diesel engines and are perfectly suited to industrial environments and have a wide range of applications in the diesel generator industry.
Main advantages:
Short Circuit & Reverse Polarity Protection
Automatic Charging Under All Conditions
Compact Size & High Efficiency
Low Battery Voltage Monitor With Dry Contacts Opening or Closing Under Fault
Charging Current LED Indicators
No Current Drain When Input Power Is Off
Specification:
Battery Charger CH2810
Power Input
Voltage 160~265 VAC
Frequency 20~100Hz
Current:10A ±0.1
DC Output
Voltage 13.8 VDC, Current 10A–when battery group=12V
Voltage 27.6 VDC, Current 3A–when battery group=24V
Charge Mode: Float charge
DC Voltage Regulation：< ±1% Efficiency：> 85% @ Full load
Contact Capacity：0.5A @ 120 VAC
Protection: Reverse polarity, over-voltage, short circuit, current limiting
Environment
Certification: CE
Operating Temperature : -20~50 °C
Storage Temperature : -30~85 °C
Relative Humidity : Maximum 90%
Vibration : 1.5G @ 5~30 Hz / 5.0G @ 30~500 Hz
Dimensions: 180(L) x 160(W) x 60 (H) mm
Single package size: 15X15X6 cm
Single gross weight: 0.800 kg
Guide for choosing the right wire to connect the chargers to the battery:
10 amp models (1210 and 2410): length 5 meters size 2 miles and length 10 meters size 2.5 miles
*It is recommended that the length of the wires should not be more than 10 meters
CH2800 series intelligent charger is specially designed for charging 12v / 24v battery, which is the most advanced in the industry to realize intelligent charging. There are three models: CH2810A ( 10A ), CH2806A ( 6A ) and CH2804A (4A ).
Intelligent Charger is specially designed for starting or working of storage battery (especially suited for full-sealed solid wide-temperature storage battery) in diesel engine. It is a intelligent mode of switch structure.
It features in constant pressure, constant current, tricking current, resistance of short circuit, and fully automated function.
This Battery Charger CH2810 is specially designed for Lead-acid battery, it is the replacement and upgrade of the traditional charger.
It can save the energy more than 30% and lasten the life of Lead-acid battery over 50%.
It can work between AC160~280V,AC80~280V and many other voltage ranges. Working frequency is 20~100Hz, temperature range is -20°C~+65°.
Intelligent Charger for Storage Battery
working of storage battery Intelligent Charger is specially designed for starting(especially suited for full-sealed solid wide-temperature storage battery) in diesel engine. It is intelligent mode of switch structure. It is the only one charger in market which can automatic identify charging voltage, current and can automatic switch over corresponding output voltage. It features in constant pressure, constant current, tricking current, resistance of short circuit, and fully automated function.
1. Features of the product
1.1 Wide working voltage of AC 160-277V, and working frequency of 20-100Hz, the engine still be charged at the low speed of rotation (users can directly replace the charger).
1.2 It can work in a wide temperature between -40 C and +50 C, and can be used in a98%RH wet condition without congealing
1.3 Constant current and fast charging. When the pressure of charge battery lower than the set value (12V battery group<12V, 24V battery group<24V), charge engine will work at the highest speed with a constant current. If electrical machine works at the same time, starting current is a large flow' (charge engine is close to short circuit), but its constant current feature makes the equipment undestroyed. (See the section of constant current in graph 1)
1.4 Limited current. When the voltage of storage battery is full, (12V battery group > 12V.24V battery group >24V) charge current will be automatically limited. (See the section of constant voltage in graph 1)
1.5 Tricking current and float charging. It will turn to float charging within about 0.1-0.2A(Relevant to the amount of electricity the objective equipment consumed) when the voltage reaches the set value. (13.8 V in the state of 12V, and 27.6 in 24V),
1.6 Stop charging. When the voltage of battery reaches the full value, (14 V in the state of12V, and 28V in 24V) charging will be shut completely.
1.7 Over current and protection against for short circuit. Charging engine functions in overcurrent and protection against for short circuit. When the capacity of battery is big, (inner resistance is small) bearing short circuit or charge engine is close to normal electricity and the storage battery starts diesel engine at the same time, the output current will still be constant and not be destroyed. Thus, when the storage battery used as the starting battery, charging engine cannot be shut.
1.8 Soft start. Because the system adopts the soft start function, it will not produce spark for electrical impulse. Besides, when the engine is connected online, it will not interrupt the electricity system.
2. Instruction for Usage
2.1 Battery charge is specially designed for storage battery. Its output contains the element of positive impulse as for the charge, but not suitable for electricity supplier for electrical equipment's, or it will interrupt the electrical equipment's.
But it will be different when charging in storage battery.
2.2 Connecting lines. L is the fire line of 220V. N is the zero line of 220V. L is the ground line. + is the positive pole, and- is the negative pole. Ground end should be connected well!
2.3 If user have no precautions against earthquakes, do not directly install on diesel group.2.4 Although the charge is dealt with damp-proofing, it should be cautious that water or other liquid should not be adhered to it. Besides, ventilation and keeping far away from thermal radiation should be kept alarm in installation in order to prevent the damage for high temperature There is a light emitting diode (LED) on the face board. When it appears different colors, it shows the different working conditions. Red - constant and fast charging. It means the charging current is the maximum value of current. (The output LED is red also). Orange (red and green) is the phase of current charging. Charging current is less. If it is redder, current is larger; if it is greener, the situation will be the reverse. Green shows the storage battery is almost full. (Output LED is green also)
Certified Quality: This product meets CE certification standards, ensuring compliance with European safety and performance requirements.
Reliable Power Supply: The 10A switch power float charger provides a consistent power supply for your generator set, ensuring reliable operation and minimizing downtime.
Wide Voltage Compatibility: Designed for both 12V and 24V lead acid batteries, this charger module offers flexibility for various applications.
Long-Lasting Performance: With a 1-year warranty, you can trust this product to deliver reliable performance for an extended period.
Cost-Effective Solution: As a cost-effective alternative, this charger module is an excellent choice for users looking to upgrade their generator set's charging system.
NOT GOOD ITEMS, GREAT ITEMS:
12V 24V lead acid battery charger module 5A switch power generator float chargers pcb circuit adapter module.
PRODUCT PROPERTY: Choose from the brand of baochai for our product.
Product original from cn(origin).
REASONS TO BUY:
24v 10A generator battery charger:
The pcb module charger is designed to provide maximum power output and protection for your electronic devices.
GENERATOR TO CHARGE 12V and 24V BATTERY:
The battery is powered by a usb cable, which can be charged directly on the power source.
it also has a built-in rechargeable battery to charge multiple devices.
PCB CIRCUIT ADAPTER MODULE:
Pcb circuit adapter module is used to connect the power source, which is very convenient for you to charge.
BUYER SAYS:
Very good product already installed several works very well recommend.
RELATED INFO:
Get 12v & 24v acid lead battery charger circuit, generator battery charger 12V 24V at a bigger saving.
Product Introduction:
SHALUO series chargers with European EMC and LVD standards, are used to charge a variety of wet batteries or jelly diesel engines and are perfectly suited to industrial environments and have a wide range of applications in the diesel generator industry.
Main advantages:
Short Circuit & Reverse Polarity Protection
Automatic Charging Under All Conditions
Compact Size & High Efficiency
Low Battery Voltage Monitor With Dry Contacts Opening or Closing Under Fault
Charging Current LED Indicators
No Current Drain When Input Power Is Off
Specification:
Battery Charger CH2810
Power Input
Voltage 160~265 VAC
Frequency 20~100Hz
Current:10A ±0.1
DC Output
Voltage 13.8 VDC, Current 10A–when battery group=12V
Voltage 27.6 VDC, Current 3A–when battery group=24V
Charge Mode: Float charge
DC Voltage Regulation：< ±1% Efficiency：> 85% @ Full load
Contact Capacity：0.5A @ 120 VAC
Protection: Reverse polarity, over-voltage, short circuit, current limiting
Environment
Certification: CE
Operating Temperature : -20~50 °C
Storage Temperature : -30~85 °C
Relative Humidity : Maximum 90%
Vibration : 1.5G @ 5~30 Hz / 5.0G @ 30~500 Hz
Dimensions: 180(L) x 160(W) x 60 (H) mm
Single package size: 15X15X6 cm
Single gross weight: 0.800 kg
Guide for choosing the right wire to connect the chargers to the battery:
10 amp models (1210 and 2410): length 5 meters size 2 miles and length 10 meters size 2.5 miles
*It is recommended that the length of the wires should not be more than 10 meters
No reviews found