AN-2000 test pencil With the advantage of not using battery and use friendly.
Is suitable for testing the contact AC/DC voltage test: 12V to250V.
Non-contact AV voltage: display by LCD, find phase line, Ground line and breakpoint of phase line
Voltage test:
before testing, please have a try on a confirmed eletric object, to check whether the tester is working well.
otherwise, do not use this tester;
the last data LCD displays is the voltage tested.
if the tested voltage doesn't reach 70% of higher voltage, it will display lower voltage;
when testing DC, please touch earth with your hand;
can use induction electrode to test eletric object lower than 12V;
the tested object should be against earth,
Induction measurement:
Touch the "test" button with your hand (do not press down), Use the blade tip bar of, tester to approach the object under measurement, if the symbol ""is displayed.
means the object is carrying alternating current, You can identify ground line and phase line by widening the lines when parallel and find
out the break point, detect microwave radiation and leakage with induction mode.
Test:
Touch the "test" button with hand to enable the contact of the blade tip of tester and the object under measurement.
if neon lamp lights up, it indicates
that the tested object is carrying alienating current and is Dangerous.
Notice
When testing, Do not press two electrodes at the same time. Otherwise, the result will be inaccurate or will impair the induction
when testing, please make sure insulated part of this tester is clean
Product Features:
Digital Voltage Tester
Screwdriver
Direction & Induction Test
Multi-Function
Specifications
2 way display: LCD & Neon Lamp
Both direct & induction test capability can find phase & ground line also breakpoint of phase line
Contact AC voltage test: 12V to 250V
DC voltage check: 1.5V to 36V
Item Code: 200144334
Category: Voltage Meters
Dimension: 133*20*17mm
Package Size: 198 * 112 * 20 ( mm )
Gross Weight/Package: 0.05 ( kg )
Package includes:
1 x AN-2000 test pencil