Aisikai BAC-2405 intelligent battery charger
IBC-110406 BAC Series battery charger is specially designed for the generator starting lead-acid battery.
It uses the latest switch power components and 2-stages charging method.
BAC05 is suitable for the long-term trickle charging (floating charge) of lead-acid battery.
The maximum charging current for 24V charger is 5A.
Diesel Generator Battery and Smart Charger
Suitable for diesel generators requiring a 12V or 24V power source
Original equipment quality battery and charger system
Lead-acid battery technology with smart charging components
Eska branded diesel generators and other compatible models
Necessary for recharging batteries during generator downtime in standby mode.
Used in automatic reserve input.
Features:
Switch power structure design; wide range of AC voltage input; small volume, light weight and high efficiency.
Use 2-stages charging method: constant current firstly and then constant voltage.
Fully follow the charging characteristic of the lead-acid battery, can avoid overcharging and largely extend the battery life.
Protection of short circuit and reverse connection.
Charging voltage and current can be field adjusted via potentiometer.
LED display for AC power indication and charging indication.
Easy to install horizontally.
Simple Installation Instructions
1. Ensure the generator is turned off and all electrical loads disconnected.
2. Connect the battery terminals to the diesel generator's battery terminals, observing correct polarity (positive to positive, negative to negative).
3. Attach the smart charger to a stable and grounded AC power source.
4. Connect the charger to the battery using the appropriate connectors.
5. Turn on the charger and allow it to charge the battery automatically until the charge cycle completes.
6. Monitor the charger display for any error messages or completion status.
7. Once charged, disconnect the charger and ensure the battery is securely fastened in place.
Automatic input of reserve built-in/in a separate cabinet
АВР - Automatic input of reserve (Automatic switching on of reserve) is designed to provide reserve power supply to loads connected to the power supply system, which has at least two power inputs and is aimed at increasing the reliability of the power supply system.
It consists in automatic connection to loads of reserve power sources in case of loss of the main one.
Design: Heavy-duty construction with robust casing and terminal protection
Performance: High cranking power, deep cycle capability, and extended service life
Features: Automatic voltage selection, microprocessor-controlled charging, temperature compensation, reverse polarity protection
Reliability
UL and CE certified, designed for harsh industrial environments
Specifications:
Product Type: Diesel Generator Battery & Smart Charger
Brand: AISIKAI
Part number (Model): BAC-2405
Supply voltage: 100-280 VAC; 50/60 Hz; 2.5 A.
Voltage Compatibility: 24V
Quality Standard: ISO9001, ISO14001, CE
Output voltage: 24-27VDC;
Maximum charge current: 5 A;
Isolation between input and output: 1.5KV;
Typically operates well in temperatures ranging from -20°C to +40°C
Dimensions (HxWxD): 53mm x 91mm x 143mm;
Overall dimensions (L; W; H; mm) in packaging: 152x103x64
Weight: 650g.
IBC-110406 BAC Series battery charger is specially designed for the generator starting lead-acid battery.
It uses the latest switch power components and 2-stages charging method.
BAC05 is suitable for the long-term trickle charging (floating charge) of lead-acid battery.
The maximum charging current for 24V charger is 5A.
Diesel Generator Battery and Smart Charger
Suitable for diesel generators requiring a 12V or 24V power source
Original equipment quality battery and charger system
Lead-acid battery technology with smart charging components
Eska branded diesel generators and other compatible models
Necessary for recharging batteries during generator downtime in standby mode.
Used in automatic reserve input.
Features:
Switch power structure design; wide range of AC voltage input; small volume, light weight and high efficiency.
Use 2-stages charging method: constant current firstly and then constant voltage.
Fully follow the charging characteristic of the lead-acid battery, can avoid overcharging and largely extend the battery life.
Protection of short circuit and reverse connection.
Charging voltage and current can be field adjusted via potentiometer.
LED display for AC power indication and charging indication.
Easy to install horizontally.
Simple Installation Instructions
1. Ensure the generator is turned off and all electrical loads disconnected.
2. Connect the battery terminals to the diesel generator's battery terminals, observing correct polarity (positive to positive, negative to negative).
3. Attach the smart charger to a stable and grounded AC power source.
4. Connect the charger to the battery using the appropriate connectors.
5. Turn on the charger and allow it to charge the battery automatically until the charge cycle completes.
6. Monitor the charger display for any error messages or completion status.
7. Once charged, disconnect the charger and ensure the battery is securely fastened in place.
Automatic input of reserve built-in/in a separate cabinet
АВР - Automatic input of reserve (Automatic switching on of reserve) is designed to provide reserve power supply to loads connected to the power supply system, which has at least two power inputs and is aimed at increasing the reliability of the power supply system.
It consists in automatic connection to loads of reserve power sources in case of loss of the main one.
Design: Heavy-duty construction with robust casing and terminal protection
Performance: High cranking power, deep cycle capability, and extended service life
Features: Automatic voltage selection, microprocessor-controlled charging, temperature compensation, reverse polarity protection
Reliability
UL and CE certified, designed for harsh industrial environments
Specifications:
Product Type: Diesel Generator Battery & Smart Charger
Brand: AISIKAI
Part number (Model): BAC-2405
Supply voltage: 100-280 VAC; 50/60 Hz; 2.5 A.
Voltage Compatibility: 24V
Quality Standard: ISO9001, ISO14001, CE
Output voltage: 24-27VDC;
Maximum charge current: 5 A;
Isolation between input and output: 1.5KV;
Typically operates well in temperatures ranging from -20°C to +40°C
Dimensions (HxWxD): 53mm x 91mm x 143mm;
Overall dimensions (L; W; H; mm) in packaging: 152x103x64
Weight: 650g.
No reviews found