Lutron DM-6046
ACA/DCA CLAMP METER
Measure max. 1000A DCA or ACA by the inductive conductor, contactless
Economical cost with professional quality
Design meet IEC 1010 safety requirement
ACA, DCA, ACV, DCV, ohms, Diode
Built-in Data Hold function
LCD display, easy & clear readout
High internal impedance, assures minimum error
LSI-circuit provides high reliability and durability
Built-in low battery indicator
Overload protection circuits provided for all range
Compact & heavy duty ABS housing plastic case
Accessories included: Test lead (red & black) and instruction manual
ACA/DCA clamp meter, 1000A
SPECIFICATIONS
Display:
13 mm (0.5") LCD, 3 1/2 digits. Max. indication 1999
Measurement & range:
ACA, DCA, ACV, DCV, ohms, Data hold
Polarity:
Automatic switching, "-" indicates negative polarity
Current sensor:
Hall effect sensor
Zero adjustment:
DCA:
External knob for DCA zero adjustment
Other:
Automatic zero adjustment
Over-input:
Display shows "1" or "-1"
Sampling time:
Approx. 0.4 second
Battery:
Heavy duty type, DC 9V battery, 006P, MN1604 (PP3) or equivalent
Power consumption:
Approx. DC 10.8 mA
Operating temperature:
0°C to 50°C (32°F to 122°F)
Operating humidity:
Less than 80% RH
Dimension:
230 (H) x 70 (W) x 36 (D) mm (9.1 x 2.8 x 1.4 inch)
Weight:
400 gr. / 0.90 LB (including battery)
Conductor jaw size:
78.5 mm (3.1 inch) - outside
ELECTRICAL SPECIFICATIONS (23°C ±5°C)
DC VOLTAGE
Range
Resolution
Accuracy
Overload circuit protection
200mV
0.1mV
±(1% + 1d)
AC/DC 400V
200V
0.1V
AC/DC 600V
600V
1V
AC VOLTAGE (50/60 Hz)
Range
Resolution
Accuracy
Overload circuit protection
200V
0.1V
±(1% + 2d)
AC/DC 600V
600V
1V
RESISTANCE
Range
Resolution
Accuracy
Overload circuit protection
2000W
1W
±(1% + 1d)
AC/DC 400V
AC/DC CURRENT
Range
Resolution
Accuracy
Overload circuit protection
200A
0.1A
±(1.5% + 15d)
AC/DC 1000V
1000A
1A
±(2% + 5d)
DIODE CHECK
Short/non conductance, good/defect test. Approx. diode VF (forward voltage)
DATA HOLD
Available for all functions to keep the data hold on the display
REMARK
Input impedance For ACV & DCV range is 10 Mega ohm.
ACA, ACV frequency response is from 40 to 400 Hz.
ACA, DCA specification be tested on sine wave 50/60 Hz.
No reviews found