FBC1206E Automatic 12V6A car battery charger Maintenance-free deep cycle 12 volt gel agm arm lead acid battery charger
1206E Newest Pulse Repair 12V battery chargers 12V 6A Automatic Intelligent start stop Pulse Repair lead acid 12 volt battery charger
Model Number: FBC1206E
Material: PC Fireproof Material, ABS
Function: Pulse Repair Lead acid Battery Charger
Maximum Output Power: 90w
Use: 12V lead acid battery
Protection: Short Circuit Protection, ovp, OTP, OLP, ocp, Over-charging, Overcurrent, Overvoltage
Input voltage and current: 100-240V/0.9A
output voltage and current: 12v 6a
Output: 14.4V 6A
Input: AC 100-240V 50/60Hz
Use: 12V lead acid battery charger
Certification: CE
Compatibility: 35AH,60AH 80AH lead acid battery
Protection:
Short circuit protection
Overvoltage protection
Overcurrent protection
Overheating protection
Reverse connection protection
Apply to: Children's toy cars, motorcycles, cars, etc.
Weight: 480g
Packaging and delivery
Single package size: 20X15X12 cm
Single gross weight: 0.500 kg
Automatic 12V car battery charger 12V 6A fast 12 volt gel agm arm lead acid battery charger
The Automatic 12V car battery charger 12V 6A fast 12 volt gel agm arm lead acid battery charger has designed highly reliable and meet international safety and electromagnetic compatibility requirements.
A:Input Characteristics:
Input Voltage: 100-240Vac input AC voltage
Input Frequency: 50Hz or 60Hz and single phase.
B:Output Characteristics:
Constant Charging Voltage: 14.4V Float charge 13.8V
C:Charging Mode Automatic 12V car battery charger 12V 6A fast 12 volt gel agm arm lead acid battery charger
3 Stages, CC, CV, Trickle
D:Safety Test for battery charger
Hi-pot Test:15KVac 5mA 3 Seconds between input and output test
Resistance: The battery charger insulation resistance shall be not less 30M ohms after application of 500Vdc/10mA for 3 Seconds
Drop test: Height: The battery charger conform to BS EN60068-2-32:1993 TEST ED: free fall appendix B
E:Protection for battery charger
Over Voltage Protection The battery charger will be auto recovered when faults remove
Over Current Protection Charger output current does not exceed the set maximum battery charging current.
Over Short Circuit Protection Battery charger output can be shorted without damage No odor, smoke, fire, plastic deformation, and excessive heal happen. The power shall be auto-recovery. (It will enter into normal condition when then the fault condition is removed)
Over reverse polarity Protection When the battery charger output line reversed after the charger will not work until the right user access only to start.
F:DC Connector Dimension: Automatic 12V car battery charger 12V 6A fast 12 volt gel AGM arm lead acid battery charger
Optional output connector: 3-port Inline, 3-pin XLR, Alligator clip, 3-port House, Coaxial etc.
Special plug: 4-pin XLR, 2-port Inline, 3-pin House, Polarized, 3-port House for Panterra and Grio, Polarized C7 etc.
1206E Newest Pulse Repair 12V battery chargers 12V 6A Automatic Intelligent start stop Pulse Repair lead acid 12 volt battery charger
Model Number: FBC1206E
Material: PC Fireproof Material, ABS
Function: Pulse Repair Lead acid Battery Charger
Maximum Output Power: 90w
Use: 12V lead acid battery
Protection: Short Circuit Protection, ovp, OTP, OLP, ocp, Over-charging, Overcurrent, Overvoltage
Input voltage and current: 100-240V/0.9A
output voltage and current: 12v 6a
Output: 14.4V 6A
Input: AC 100-240V 50/60Hz
Use: 12V lead acid battery charger
Certification: CE
Compatibility: 35AH,60AH 80AH lead acid battery
Protection:
Short circuit protection
Overvoltage protection
Overcurrent protection
Overheating protection
Reverse connection protection
Apply to: Children's toy cars, motorcycles, cars, etc.
Weight: 480g
Packaging and delivery
Single package size: 20X15X12 cm
Single gross weight: 0.500 kg
Automatic 12V car battery charger 12V 6A fast 12 volt gel agm arm lead acid battery charger
The Automatic 12V car battery charger 12V 6A fast 12 volt gel agm arm lead acid battery charger has designed highly reliable and meet international safety and electromagnetic compatibility requirements.
A:Input Characteristics:
Input Voltage: 100-240Vac input AC voltage
Input Frequency: 50Hz or 60Hz and single phase.
B:Output Characteristics:
Constant Charging Voltage: 14.4V Float charge 13.8V
C:Charging Mode Automatic 12V car battery charger 12V 6A fast 12 volt gel agm arm lead acid battery charger
3 Stages, CC, CV, Trickle
D:Safety Test for battery charger
Hi-pot Test:15KVac 5mA 3 Seconds between input and output test
Resistance: The battery charger insulation resistance shall be not less 30M ohms after application of 500Vdc/10mA for 3 Seconds
Drop test: Height: The battery charger conform to BS EN60068-2-32:1993 TEST ED: free fall appendix B
E:Protection for battery charger
Over Voltage Protection The battery charger will be auto recovered when faults remove
Over Current Protection Charger output current does not exceed the set maximum battery charging current.
Over Short Circuit Protection Battery charger output can be shorted without damage No odor, smoke, fire, plastic deformation, and excessive heal happen. The power shall be auto-recovery. (It will enter into normal condition when then the fault condition is removed)
Over reverse polarity Protection When the battery charger output line reversed after the charger will not work until the right user access only to start.
F:DC Connector Dimension: Automatic 12V car battery charger 12V 6A fast 12 volt gel AGM arm lead acid battery charger
Optional output connector: 3-port Inline, 3-pin XLR, Alligator clip, 3-port House, Coaxial etc.
Special plug: 4-pin XLR, 2-port Inline, 3-pin House, Polarized, 3-port House for Panterra and Grio, Polarized C7 etc.
No reviews found