16AMP Charger is a NEW 6V5A 12V16A 24V10A Car Battery Charger For Lithium LiFePO4 AGM GEL Lead-Acid Batteries Pulse Repair Car and Motorcycle and Truck or another Type Battery Charger
Features:
Charge current switch.
For batteries used on Battery Management Systems(BMS) only.
For charging 12V or 24V LiFePO4 batteries.
For activation or maintenance of weak, old and idle batteries.
Used to select a mode for charging 12V or 24V Lithium batteries,
Can not repair severely damaged batteries. Not for Lithium and LiFePO4 batteries.
For ordinary lead-acid batteries/maintenance-free batteries
including AGM, GEL, SLA, WET, DEEP CYCLE, EFB, Calcium, etc.
About this item
16A car battery charger: car batteries charger is only used for 6V/5A & 12V/16A & 24V/10A lead-acid batteries (AGM, calcium, GEL, MF, EFB, SLA, VRLA, WET), lithium batteries and LiFePo4 batteries. It is often used to safely and efficiently charge cars, motorcycles, boats, lawn mowers.
Highly efficient pulse repair: car charger uses 9-stage automatic charging, including battery detection, desulphurization, trickle charging, etc. The repair mode is used to repair and activate old and weak batteries. Note: Totally empty batteries cannot be activated or charged. The repair mode only works with lead-acid batteries.
Visualized charging: chargers for car batteries 4 modes with one button. With LCD screen, display battery voltage, charging current, charging temperature, full battery, etc. Automatically switch between summer and winter mode to adapt to the ambient temperature for optimal charging status.
24 V forced charging mode: if the 24 V battery voltage is too low, the charger may detect that it is a 12 V battery. You can press and hold the button for 3 seconds, the charger emits the alarm "bi bi bi", release the button and then press the button again for 3 seconds, the charger again emits the alarm "bi bi bi" and enter the "24V forced charging mode".
Intelligent charging: spark protection, short circuit protection, reverse protection, under voltage protection, overvoltage protection, overcurrent protection, overheating protection. Automatically identify the defective battery so you can replace it in time. Charger car battery has a memory function.
Lithium LiFePO4 LEAD-ACID SMART BATTERY CHARGER
6V 5-Amp ,12V 16-Amp and 24V 10-Amp 10-stage Fully-Automatic Smart battery charger, charging speed is much faster than 10-Amp or 8-Amp automatic chargers. Charge or repair all 12-volt and 24-volt Lithium LiFePO4 or lead-acid automotive, marine and deep-cycle batteries including AGM, GEL, SLA, Flooded in cars, trucks, SUV, motorcycles, lawnmowers, boat marine, etc.
UPGRADED 10-STAGE TRICKLE CHARGER
The first battery charger that adopts 10-stage charging process, much safer and more efficient. Specially designed trickle charge mode will automatically enters trickle/float charging mode after fully charged, keep maintaining your batteries during this winter and holidays, leave batteries for months and still fully charged when you come back.
HIGH-EFFICIENCY PULSE REPAIR
Automatically detects battery sulfating and acid stratification, takes the newest pulse repair function to restore lost battery performance for stronger engine starts and extended battery life. Note: can not activate or charge totally dead batteries , It is a battery charger not jump starter .
OVERALL CHARGING PROTECTIONS
Smart control, temp compensation in hot climates and under-charging in cold climates, reverse protection, cooling system, overcurrent, fireproof material, overvoltage, short circuit. Battery trickle charger with multiple protection ensure the safety charging at anytime anywhere.
LARGE LED SCREEN
Extra large LED screen not only clear to see under the sunlight but also displays the charging and battery status; charge voltage and current, inside temperature(℉/°C), charge percentage, summer mode, winter mode, etc.
16 amp smart battery charger Problem
1: Can't reach the maximum charging current? To protect the battery, the system automatically identifies the battery voltage and selects the most appropriate current to charge the battery. When the battery voltage is low (for example, the 12V battery voltage is less than 11V), the system automatically charges the battery at the maximum current.
2: The LifePO4 battery is not fully charged? When the battery is fully charged, it has a callback function, reducing the charge by about 1V-2V, which is normal. Added a small current after full charge uninterrupted charging.
3: Fan noise? It is normal that the fan has wind.
charger parameters
AC input :100v-240v~ 50/60 hz. Output current :12V16A & 24V10A
Output voltage :12V / 24V. (normal - Max:13.2V-14.6V / 26.5V-29.2V). Lithium /LiFePO4/ lead acid (AGM,GEL,EFB, MF, Flooded, VRLA, SLA and wet battery..).
Max: Lithium :12.4V-14.6V / 24.8V-29.2V. Lead acid :14.7V / 29.4V. LifePO4:14.6V / 29.2V.
Support ah: 2AH-300AH... can have more capacity, the larger the capacity needs longer charging time.
Minimum starting voltage > 2.0 V
Power and load :MAX; 200W. Size :158 x90x50mm(6.22 * 3.54 * 1.97 inches) .NET weight: 500g
Note :1 Only charge the lithium battery with battery protection board(BMS).
2 Charge the battery below 15AH with the minimum current
Q&A
Q1. What is the maximum charging current? whether can reach or not?
A1:To protect the battery, the system automatically identifies the battery voltage and selects the most appropriate current to charge the battery.
When the battery voltage is low (for example, the 12V battery is less than 11V), the system automatically charges the battery at the maximum current.
Q2:Does The LifePO4 battery can fully charged?
A2:There will be a callback feature after this type of battery is full, and the power is off about 1V, which is normal, please
know!
Specification
Type: CAR CHARGER
brand name: HTRC
model number: 16A
Use for: Lithium/LiFePO4/Lead-Acid (AGM,GEL,EFB, MF, FLOODED, VRLA, SLA and Wet batteries..)
place of origin: Guangdong, China
Material: Plastic
AC input: AC100-240V/3A 50/60Hz
Output: 6V/5A and 12V/16A and 24V/10A
output power: 220W
Function: Fast Charging
Usage: Standard Battery
private mold: Yes
multi-function integrated: With cable
Protection: Over-charging
Certification: CE FCC ROHS
package size: 22.5X10.5X7.5 cm
gross weight: 0.570 KG
WARNING:
Explosive gases may emitting from battery during charging.
Provide ventilation to prevent flames and sparks.
Do not expose charger to the sun, or under high temperature environment.
Battery acid is corrosive. Rinse immediately with water if acid comes into contact with skin or eyes.
Do not charge a frozen or damaged battery.
The charger is designed for 6V and 12V and 24V Lithium, Lead-Acid, LiFePO4 batteries
with Standard capacity from 6AH - 120AH(12V), 6AH - 60Ah(24V).
Check battery manufacturer specifications before using.
Do not charge non-rechargeable batteries.
Do not place the charger on the battery while charging
What you Get:
1x 16A Charger
1x User Manner
1x Clip line
1x AC Cable (EU)
Features:
Charge current switch.
For batteries used on Battery Management Systems(BMS) only.
For charging 12V or 24V LiFePO4 batteries.
For activation or maintenance of weak, old and idle batteries.
Used to select a mode for charging 12V or 24V Lithium batteries,
Can not repair severely damaged batteries. Not for Lithium and LiFePO4 batteries.
For ordinary lead-acid batteries/maintenance-free batteries
including AGM, GEL, SLA, WET, DEEP CYCLE, EFB, Calcium, etc.
About this item
16A car battery charger: car batteries charger is only used for 6V/5A & 12V/16A & 24V/10A lead-acid batteries (AGM, calcium, GEL, MF, EFB, SLA, VRLA, WET), lithium batteries and LiFePo4 batteries. It is often used to safely and efficiently charge cars, motorcycles, boats, lawn mowers.
Highly efficient pulse repair: car charger uses 9-stage automatic charging, including battery detection, desulphurization, trickle charging, etc. The repair mode is used to repair and activate old and weak batteries. Note: Totally empty batteries cannot be activated or charged. The repair mode only works with lead-acid batteries.
Visualized charging: chargers for car batteries 4 modes with one button. With LCD screen, display battery voltage, charging current, charging temperature, full battery, etc. Automatically switch between summer and winter mode to adapt to the ambient temperature for optimal charging status.
24 V forced charging mode: if the 24 V battery voltage is too low, the charger may detect that it is a 12 V battery. You can press and hold the button for 3 seconds, the charger emits the alarm "bi bi bi", release the button and then press the button again for 3 seconds, the charger again emits the alarm "bi bi bi" and enter the "24V forced charging mode".
Intelligent charging: spark protection, short circuit protection, reverse protection, under voltage protection, overvoltage protection, overcurrent protection, overheating protection. Automatically identify the defective battery so you can replace it in time. Charger car battery has a memory function.
Lithium LiFePO4 LEAD-ACID SMART BATTERY CHARGER
6V 5-Amp ,12V 16-Amp and 24V 10-Amp 10-stage Fully-Automatic Smart battery charger, charging speed is much faster than 10-Amp or 8-Amp automatic chargers. Charge or repair all 12-volt and 24-volt Lithium LiFePO4 or lead-acid automotive, marine and deep-cycle batteries including AGM, GEL, SLA, Flooded in cars, trucks, SUV, motorcycles, lawnmowers, boat marine, etc.
UPGRADED 10-STAGE TRICKLE CHARGER
The first battery charger that adopts 10-stage charging process, much safer and more efficient. Specially designed trickle charge mode will automatically enters trickle/float charging mode after fully charged, keep maintaining your batteries during this winter and holidays, leave batteries for months and still fully charged when you come back.
HIGH-EFFICIENCY PULSE REPAIR
Automatically detects battery sulfating and acid stratification, takes the newest pulse repair function to restore lost battery performance for stronger engine starts and extended battery life. Note: can not activate or charge totally dead batteries , It is a battery charger not jump starter .
OVERALL CHARGING PROTECTIONS
Smart control, temp compensation in hot climates and under-charging in cold climates, reverse protection, cooling system, overcurrent, fireproof material, overvoltage, short circuit. Battery trickle charger with multiple protection ensure the safety charging at anytime anywhere.
LARGE LED SCREEN
Extra large LED screen not only clear to see under the sunlight but also displays the charging and battery status; charge voltage and current, inside temperature(℉/°C), charge percentage, summer mode, winter mode, etc.
16 amp smart battery charger Problem
1: Can't reach the maximum charging current? To protect the battery, the system automatically identifies the battery voltage and selects the most appropriate current to charge the battery. When the battery voltage is low (for example, the 12V battery voltage is less than 11V), the system automatically charges the battery at the maximum current.
2: The LifePO4 battery is not fully charged? When the battery is fully charged, it has a callback function, reducing the charge by about 1V-2V, which is normal. Added a small current after full charge uninterrupted charging.
3: Fan noise? It is normal that the fan has wind.
charger parameters
AC input :100v-240v~ 50/60 hz. Output current :12V16A & 24V10A
Output voltage :12V / 24V. (normal - Max:13.2V-14.6V / 26.5V-29.2V). Lithium /LiFePO4/ lead acid (AGM,GEL,EFB, MF, Flooded, VRLA, SLA and wet battery..).
Max: Lithium :12.4V-14.6V / 24.8V-29.2V. Lead acid :14.7V / 29.4V. LifePO4:14.6V / 29.2V.
Support ah: 2AH-300AH... can have more capacity, the larger the capacity needs longer charging time.
Minimum starting voltage > 2.0 V
Power and load :MAX; 200W. Size :158 x90x50mm(6.22 * 3.54 * 1.97 inches) .NET weight: 500g
Note :1 Only charge the lithium battery with battery protection board(BMS).
2 Charge the battery below 15AH with the minimum current
Q&A
Q1. What is the maximum charging current? whether can reach or not?
A1:To protect the battery, the system automatically identifies the battery voltage and selects the most appropriate current to charge the battery.
When the battery voltage is low (for example, the 12V battery is less than 11V), the system automatically charges the battery at the maximum current.
Q2:Does The LifePO4 battery can fully charged?
A2:There will be a callback feature after this type of battery is full, and the power is off about 1V, which is normal, please
know!
Specification
Type: CAR CHARGER
brand name: HTRC
model number: 16A
Use for: Lithium/LiFePO4/Lead-Acid (AGM,GEL,EFB, MF, FLOODED, VRLA, SLA and Wet batteries..)
place of origin: Guangdong, China
Material: Plastic
AC input: AC100-240V/3A 50/60Hz
Output: 6V/5A and 12V/16A and 24V/10A
output power: 220W
Function: Fast Charging
Usage: Standard Battery
private mold: Yes
multi-function integrated: With cable
Protection: Over-charging
Certification: CE FCC ROHS
package size: 22.5X10.5X7.5 cm
gross weight: 0.570 KG
WARNING:
Explosive gases may emitting from battery during charging.
Provide ventilation to prevent flames and sparks.
Do not expose charger to the sun, or under high temperature environment.
Battery acid is corrosive. Rinse immediately with water if acid comes into contact with skin or eyes.
Do not charge a frozen or damaged battery.
The charger is designed for 6V and 12V and 24V Lithium, Lead-Acid, LiFePO4 batteries
with Standard capacity from 6AH - 120AH(12V), 6AH - 60Ah(24V).
Check battery manufacturer specifications before using.
Do not charge non-rechargeable batteries.
Do not place the charger on the battery while charging
What you Get:
1x 16A Charger
1x User Manner
1x Clip line
1x AC Cable (EU)
No reviews found